Zaph|Audio ZRT 2-Way Revelator Tower Pair
Price:
$1,389.00
The selected item is out of stock, please select a different item or combination
Volume Pricing
10 - 10,000
10% off
10% off
ZRT 2-Way, Zaph|Audio Revelator Tower - Parts Only - Pair
Price shown is for a PAIR
Madisound and Zaph Audio are pleased to bring you the Zaph Revelator Tower. The ZRT is raising the bar for easy to build high-end speaker kits. Once again, we would like to thank John Krutke for his design work and overall contribution to DIY speaker building. Full documentation of this design can be found on Zaph Audio.
The ZRT is an extremely versatile premium speaker kit utilizing Scan-Speak Revelator drivers. The 2-Way configuration is designed for ported use in the Madisound MD38T tower cabinet. In addition to a ported MD38T, the ZRT 2-Way is also suitable for a sealed alignment in the Madisound MD20 cabinet.
The tweeter used is the Scan-Speak “AirCirc” D3004/6600. This is the latest and most advanced release from the famous Revelator tweeter line. The mid/bass driver is the Scan-Speak 18W/8531G. This 7” slit paper cone driver is widely considered one of the best mid/bass units in existence. The combination of these drivers and Zaph’s design expertise has yielded a world-class speaker system.
Two crossover options are available for the ZRT 2-Way Kit. Both options use Mundorf metal oxide resistors for the tweeter, air core inductors in parallel tweeter circuits and a XPP polypropylene capacitor in the parallel woofer circuit. The woofer and tweeter crossovers come assembled, with each mounted on their own Matrix and 149B circuit boards. This allows for bi-amp/bi-wiring if desired, and flexibility in cabinet placement.
- The standard crossover uses: ClarityCap CSA capacitors in series tweeter circuit, Solen Fast Cap in parallel tweeter circuit, and Solen Perfect Lay 14awg inductor in series woofer circuit. Note: Picture shows Sledgehammer Steel laminate inductor which is currently unavailable.
- The upgraded crossover uses: ClarityCap CSA capacitors in series tweeter circuit, Solen Fast Cap in parallel tweeter circuit, and Goertz Copper Foil 14 AWG or 12 AWG inductor in the series woofer circuit.
If there is a specific combination of premium parts (Madisound stock only) that you would like to use for this crossover, please contact us by email with that parts list for a quote. The crossover parts we use are a good choice in this application and provide excellent results, but we will of course accomodate to your own taste. A ZRT 2.5 Way version is also available with an additional 18W/8531G mid/bass driver. This configuration can be done in a sealed MD38T tower cabinet, or ported in your own larger cabinet. See Zaph Audio for more details.
The ZRT 2-Way Kit includes:
- (2) D3004/6600 “AirCirc” Tweeters
- (2) 18W/8531G 7” Revelator Woofers
- (2) Assembled Crossovers - Standard
Optional ZRT 2-Way Accessories Package includes:
- (2) TD-CUPS Input Cups – 2 per pair
- High quality gold plated brass binding posts
- Accepts banana plugs, spades or raw wire
- Bi-wire/Bi-amp capable
- (2) 2FLARE 2” Precision Ports
- See vented tuning options - both flares with no center piece is recommended
- Promotes optimal air flow
- Reduces/eliminates port noise and chuffing
- (16') Supra Classic 1.6 Internal Wire – 15awg Tin Plated OFC Copper
- (8') Foam gasket tape for air tight seal of drivers
- (1) Goop for gluing foam sheets and ports
- (16) Quick Connects - for easy connection of speaker wire to drivers & input cup tabs
- Black Ox/Wax Mounting Hardware
- Internal Dampening Materials
- (2) Open cell acoustic Foam Sheet 27" x 42" x 5/8"
- (2.5#) Acousta-Stuff complex fiber fill
You may select this accessories package along with kit purchase, or buy your parts individually. Kit discount only applies to this accessories package, not individual parts purchases. Kit pricing reflects a 10% discount to all drivers and accessories.
The Zaph|Audio ZRT 2-Way Revelator Tower represents audiophile-grade engineering excellence. This component package includes carefully selected drivers and crossover parts that deliver reference-level performance when assembled according to the renowned Zaph|Audio specifications.
Great experience
Reviewed by krahm7@gmail.com on 09/01/2022
So pleased with this kit--as well as with the resulting speakers. This was my first attempt building speakers, and even as a moderately experienced woodworker, I found the boxes to be a bit more of a job than I'd expected, but that was partly the fault of my local wood supplier, who sold me two sheets of plywood that weren't quite the same thickness (and partly my fault for not catching it until things got ugly). But the Madisound crossovers were well constructed and tidy. I didn't feel that the adhesive supplied in the accessories kit was the best product for securing the felt lining on the interior of the boxes--I found that 3M aerosol adhesive worked MUCH better, even when only applied to the felt surface. I didn't receive quite enough wire in the original shipment, but Madisound sent me what I needed to finish, no questions asked. Great experience. The finished speakers sound absolutely phenomenal--just as you'd expect (hope, really) a 2-way set would with soft-dome tweeters and paper cones. Very natural sounding, but with great clarity and precision. I don't give 5-start ratings lightly.
Verified Purchase
A great replacement for my Maggies
Reviewed by wdbailey45 on 04/19/2018
I was hoping for a speaker lessing imposing of appearance and a bit easier to place than my Magneplanar MG 1.6QR's. The ZRT's exceeded my expectations.
They are more transparent and detailed than the MG 1.6 and have a somewhat better defined bass. The ZRT's are very neutral in sound with clear, extended highs and no excessive upper bass/lower mid-range warm, (as is a common fault).
I when for the 14 ga. air-core transformer option in the low pass filter. Since the Madisound 38 liter tower cabinets are no longer available, (unfortunately), I settled on 33 liter towers from another source, and adjusted the vent length using a Bass Box Pro calculation with great success.
I highly recommend the Zaph Audio ZRT's and the Madisound parts.
They are more transparent and detailed than the MG 1.6 and have a somewhat better defined bass. The ZRT's are very neutral in sound with clear, extended highs and no excessive upper bass/lower mid-range warm, (as is a common fault).
I when for the 14 ga. air-core transformer option in the low pass filter. Since the Madisound 38 liter tower cabinets are no longer available, (unfortunately), I settled on 33 liter towers from another source, and adjusted the vent length using a Bass Box Pro calculation with great success.
I highly recommend the Zaph Audio ZRT's and the Madisound parts.
Verified Purchase
Ethereal
Reviewed by HeartFixr on 06/22/2015
I made the 2-way (bookcase sized) speaker about one year ago and have been astounded at how accurate and enjoyable they are. Absolutely no regrets and would highly recommend them to anyone. Audiophile friends have listened to them and have been very complimentary.
Astounding for the price...
Reviewed by xyrium on 10/07/2013
I assembled these using a PE 20 liter cab in a sealed config. I bought the standard xover, and the modified nearfield config. Both yielded fantastic results.
Recently, I was in the market for a new nearfield monitor. So, I had these and a pair of Focal Solo6 monitors running side by side off of my Driverack 260. Overall, the Focals had a slightly better centered image, but the ZRTs outclassed the Focals in everything else, including LF extension.
In a higher quality cabinet, I'd suggest that they'd be even more impressive. Great design from a good guy and a fantastic reseller. Highly recommended!
Recently, I was in the market for a new nearfield monitor. So, I had these and a pair of Focal Solo6 monitors running side by side off of my Driverack 260. Overall, the Focals had a slightly better centered image, but the ZRTs outclassed the Focals in everything else, including LF extension.
In a higher quality cabinet, I'd suggest that they'd be even more impressive. Great design from a good guy and a fantastic reseller. Highly recommended!
ZRT
Reviewed on 09/28/2012
'It took all winter to build the one and half inch cabinets for the ZRTs. I used Baltic Birch and MDF laminated together and beveled the sides to the front to keep volume and baffle width correct. To make a long story short my EPOS have been given away to my sister. The ZRTs side by side to the EPOS absolutely blew the EPOS away, not even fair. The ZRTs were not even broke in and smoked the EPOS. I have listened to the ZRTs now since March and they are a joy with any type of music. I have had Klipsch Heresy, Magnepans and EPOS and I won't be looking for speakers again- totally delighted. Also thanks for the Technical advice and helping me make a decision to build the ZRTs. Thanks again, a great winter project.' Review by James Knuth. Posted by Madisound.
ZRT
Reviewed on 09/28/2012
'I purchased the ZRT kit in 2009 and have been listening to them for over a year now. This is an outstanding 2-way monitor and the best set of speaks in my somewhat speaker-heavy house. Very highly recommended and you should definitely read the entire ZRT design on Zaph's Website and adjust the voicing to your own personal preference. I like this so much they are getting custom pentagonal column enclosures with 1" thick material and an exotic wood finish. The Mad cabinets are great value for the money but I think this kit deserves something more : ) Amazing bass, very clear and neutral through the whole range, and the 6600Aircirc tweeter has to be heard to be believed. Cheers / Robert' Review by Robert Bantly. Posted by Madisound.
Products You May Like
Satori Helios 9.5" 2-Way Speaker Kit - Pair
Product ID: Helios
Satori Helios Speaker Kit designed by Jeff Bagby & Javad Shadzi
E-mail to a friend
Zaph|Audio ZRT 2-Way Revelator Tower Pair
